Product Overview
E300 Pro Full-featured RTK Receiver
E300 Pro is a new generation RTK product by eSurvey GNSS. The durable IP67 design makes it possible to work in various environments. Multi constellation and frequency tracking always gives a Fixed solution for your job. Thanks for the small-size design, E300 Pro is suitable for different applications such as car and machine control.
Multi-constellation and multi-frequency
With 800 channels of GNSS tracking, E300 Pro provides stable and reliable accuracy. All GNSS signals are coming with standard including GPS, BDS, GLONASS, GALILEO, QZSS, IRNSS and SBAS.
Intelligent Battery LED Indicators
Without powering the device, it is able to check the battery level on the battery LED indicators by simply clicking the power button.
MEMS Dynamic Tilt Survey
eSurvey’s innovative tilt survey solution provides a surprising experience. The sensor is adapted to various working environments and can be ready within 10 sec. Maximum 60° incline angle ensures a tilt-to-go survey without stopping your work.
L-band Atlas
Atlas is a service to provide global precision correction service over L-band satellites. With ATLAS subscription, E300Pro is able to achieve centimeter accuracy without any base station.
aRTK
Powered by Atlas, the innovative aRTK technology operates on any Atlas-capable device by enabling it to maintain RTK-level accuracy, availability, and reliability when RTK corrections fail without additional cost.
Web UI
It is able to view position status, set up working mode, download data and update firmware from the Web user interface with any phone, tablet or PC.
Intelligent Voice
E300 Pro will broadcast voice automatically to remind user the solution status is changed. It is also able to manually broadcast current working mode and solution status by short pressing power button.
Rugged Design
E300Pro main body is using magnesium materials to provide strong shock and vibration resistant characteristics. IP67 certification ensures operation in various tough environments.
What's included:
E300Pro RTK Rover with internal Li-Ion battery, 4G modem and IMU Tilt Sensor 1pc
USB-C PD power adapter for charging 1pc
Small Hard Carrying Case 1pc
GNSS | |
GNSS Engine | Hemisphere P20 |
Satellites Tracking | GPS: L1CA/L1P/L1C/L2P/L2C/L5 BDS: B1I/B2I/B3I/B1C/B2a/B2b/ACEBOC GLONASS: G1/G2/G3, P1/P2 GALILEO: E1/E5a/E5b/E6/ALTBOC QZSS: L1CA/L1C/L2C/L5/LEX IRNSS: L5 SBAS1: L1, L5 (WAAS, EGNOS, GAGAN, SDCM, MSAS) L-Band: Atlas H10/H30/Basic |
Channels | 800 |
Signal Reacquisition | <1 sec |
Cold Start | <60 sec |
Warm Start | <30sec |
Hot Start | <10 sec |
RTK Signal Initialization | <8 sec |
Initialization Reliability | >99.9% |
Update Rate | 10hz standard, up to 50hz |
Performance | |
High Precision Static | H: 2 mm + 0.1 ppm V: 3 mm + 0.4 ppm |
Static | H: 2.5 mm + 0.1 ppm V: 3.5 mm + 0.4 ppm |
Fast Static | H: 2.5 mm + 0.1 ppm V: 3.5 mm + 0.4 ppm |
RTK | H: 8 mm + 1 ppm V: 15 mm + 1 ppm |
Code Defferential | H: 0.25 m V: 0.45 m |
SBAS | H: 0.3 m V: 0.6 m |
L-Band | Atlas H10: 4 cm RMS Atlas H30: 15 cm RMS Atlas Basic: 30 cm RMS |
System | |
Operation System | Linux |
Internal Memory | 8 GB |
External Memory | - |
Tilt Sensor / IMU | MEMS, Fast initialization, dynamic tilt survey up to 60° |
Communication | |
GSM | Global 4G |
Bluetooth | BT 5.0, BLE |
WiFi | 802.11 b/g/n |
SIM Card | Nano SIM card |
Internet Modem | |
Supported band | Global GSM /WCDMA/LTE |
Internal Radio | |
Type | TX and RX |
Frequency Range | 410 ~ 470 MHz |
Emitting Power | 1W |
Operation Range | 3-5km typically, 10km with optimal conditions |
Channel Spacing | 12.5 KHz / 25 KHz |
Protocol | Satel, PCC, TrimTalk, TrimMark III, South, HiTarget |
Ports | |
Serial | 5-pin Lemo socket, connect to external radio and power NMEA data output |
USB | USB-C, Charge and data transmission |
TNC Port | Connect to internal radio antenna |
Web UI | View status, update firmware, set up working mode, download data |
Voice | Broadcast working status |
NMEA Output | GGA, ZDA, GSA, GSV, GST, VTG, RMC, GLL, Binary |
Correction Data | CMR, CMR+, RTCM2, RTCM3, RTCM32 |
Power Supply | |
Battery | Rechargeable and built-in Lithium-ion battery, 7.2 V ~ 6800 mAh |
External Power Supply | 9-28V DC, with over-voltage protection |
Working Time | Up to 12 hours |
Charging Time | Typically 4 hours |
Physical | |
Dimension | ϕ158mm x h53mm |
Weight | 940g |
Screen | - |
Operating Temperature | -40°C +65°C |
Storage Temperature | -45°C +80°C |
Water/Dust Proof | IP67 |
Shock | Survive a 2m drop on concrete |
Vibration | Vibration Resistant |
Humidity | Up to 100% |
Indicators | Satellites, datalink, Bluetooth, battery |
Keyboard | Power button |
Certification | CE, FCC, NGS Calibration |