Product Overview
eSurvey E600 GNSS receiver
The E600 receiver can track all current satellite constellations and signals, including GPS/GLONASS/BEIDOU/GALILEO/QZSS, etc. The new generation of Athena RTK engine effectively improves RTK initialisation success rate and initialisation accuracy in harsh environments, and supports long-baseline RTK solution, which is an effective guarantee for high-efficiency and high-precision RTK operations.
Included:
- E600H RTK Rover with 4G modem, UHF radio and IMU tilt sensor 1pc
- BP-5S Intelligent Li-Ion Battery 2pcs
- BP-5S External charger with AC power adapter (UK Plug) 1 pc
- UHF Antenna 1PC
- Hard Small Carrying Case
GNSS | |
GNSS Engine | |
Satellites Tracking |
GPS: L1CA/L1P/L1C/L2P/L2C/L5
GLONASS: G1/G2/G3, P1/P2 GALILEO: E1BC/E5a/E5b QZSS: L1CA/L1C/L2C/L5 Beidou: B1/B2/B3 SBAS: L1, CA/L5 L-Band |
Channels | 600 |
Signal Reacquisition | <1 sec |
Cold Start | <60 sec |
Warm Start | <30sec |
Hot Start | <10 sec |
RTK Signal Initialization | <8 sec |
Initialization Reliability | >99.9% |
Update Rate |
10hz standard, up to 50hz
|
Performance | |
High Precision Static |
H: 2 mm + 0.1 ppm
V: 3 mm + 0.4 ppm |
Static |
H: 2.5 mm + 0.5 ppm
V: 3 mm + 0.5 ppm |
Fast Static | |
RTK |
H: 4 mm + 1 ppm
V: 8 mm + 1 ppm |
Code Defferential | H: 0.25 m V: 0.45 m |
SBAS | H: 0.3 m V: 0.6 m |
L-Band |
Atlas H10: 4 cm RMS
Atlas H30: 15 cm RMS Atlas Basic: 30 cm RMS |
System | |
Operation System | Linux |
Internal Memory | 8 GB |
External Memory |
Removable memory support TF card
|
Tilt Sensor / IMU |
MEMS, Fast initialization, dynamic tilt survey
up to 60° |
Communication
|
|
GSM | Global 4G |
Bluetooth |
V2.1+EDR / V4.1 Dual Mode, Class2
|
WiFi | 802.11 b/g/n |
SIM Card | SIM card |
Internet Modem | |
Supported band | |
Internal Radio | |
Type | TX and RX |
Frequency Range |
410 ~ 470 MHz, 902.4 ~ 928 MHz
|
Emitting Power | 1W |
Operation Range |
3-5km typically, 10km with optimal conditions
|
Channel Spacing |
12.5 KHz / 25 KHz
|
Protocol |
Satel, PCC, TrimTalk, TrimMark III, South, HiTarget
|
Ports | |
Serial |
5-pin Lemo socket, connect to external radio and power
NMEA data output |
USB |
USB-C, Charge and data transmission
|
TNC Port | |
Web UI |
View status, update firmware, set up
working mode, download data |
Voice |
Broadcast working status
|
NMEA Output |
GGA, ZDA, GSA, GSV, GST, VTG, RMC,
GLL, Binary |
Correction Data |
CMR, CMR+, RTCM2, RTCM3, RTCM32
|
Power Supply | |
Battery |
Dual rechargeable batteries
battery, 7.2 V ~ 3400 mAh *2 |
External Power Supply |
9-28V DC, with over-voltage protection
|
Working Time | Up to 10 hours |
Charging Time |
Typically 4 hours
|
Physical | |
Dimension | 156mm x 76mm |
Weight |
1.2 Kg with 2 batteries inside
|
Screen | |
Operating Temperature | -45°C +65°C |
Storage Temperature | -50°C +80°C |
Water/Dust Proof | IP67 |
Shock |
Survive a 2m drop on concrete
|
Vibration |
Vibration Resistant
|
Humidity | Up to 100% |
Indicators | |
Keyboard | Power button |
Certification |
CE, FCC, NGS Calibration
|
Product Specifications
Warranty Information
This product comes with 12 months warranty for parts and labor, and 90 days for batteries. Please, refer to our Ts&Cs for further information. Apart from that manufacturer offers own warranty. Original e-Survey GNSS warranty is available here: Manufacturer's Warranty